-
Handmade Shelving DIY using Industrial Piping
This Handmade Shelving using Industrial Piping is a quick Saturday afternoon project that will seriously change the look of any room! There are tutorials all over the web for these type of shelving so this is probably nothing new. Simplifying was the route I used. (Yes that is a ceiling fan in my bathroom- best decision ever) First gather your supplies. You will need: 1- 8 foot long 2″ x 8″ Fir Wood. Cut in half to make 4 foot lengths. Table saw or chop saw to cut the wood (If you don’t have a saw you can have your local wood store cut it) Hardware needed: 4 – 3/4″…
-
Wood Stained Small Framed Signs
This post may be short and simple as I didn’t take pictures of the steps along the way. So sorry I don’t have a tutorial for you! But I just had to show you how cute these little signs turned out! Hubby created two small boxes out of leftover wood that we had in our garage. He used the Kreg Jig to put the corners together. He filled the holes with putty and sanded the frames down. I stained them with a dark stain and let them dry. While they were drying I took a piece of plywood (thin wood) and made backs to fit on the back side of…
-
Farmhouse King size bed
Farmhouse King size bed My headboard and bedroom set was made by my father over 20 years ago and I knew it was time for a change. I looked all over for the perfect bedroom set that would be sturdy and not require box springs. Only to find that most bed frames (headboard/foot board) were quite costly and way over our budget. So I warmed hubby up to the idea of building our own bed and found some plans for my new bed! That is how the process of my Farmhouse King size bed came to be. I found the plans on Ana White but of course altered them to…
Handmade crafts, DIY, Upcycling, Home Decor
